fischer fixings UK Ltd Hilti (Gt. Britain) Ltd Rawlplug Ltd Spit Fixings DeWalt EJOT UK Ltd Sormat

QST Construction Services Ltd

QST Construction Services Ltd

We are a Specialist Civil Engineering contractor offering a comprehensive anchor testing service as a key part of our multi-disciplinary offer to the construction, rail, marine, nuclear and national grid industries providing the highest quality of service to our clients.

We are a member of Constructionline. All our operatives are fully trained to work within all civils environments.

Key features of our testing service are:

  • Testing carried out using hydraulic pumps and rams with varied kN gauges to provide a tensile or shear value for an installed anchor system.
  • Any anchor size and base material can be tested and is recommended where there is a safety critical load being applied to the anchor.
  • All tests are complimented with a displacement measure showing the movement given by an installed fixing whilst under the required load.
  • Every test is documented with the load applied in stages and held at intervals of time to show the load carried within the parameters set out by the designers and manufacturers
  • The documentation is then formatted into a test report to CFA Test report format and forwarded onto the contractor for their records as required.
  • All testing is carried out to CFA test procedures and therefore will comply with BS 8539:2012.

Testing categories
Category Load Capacities - kN
General Purpose - Tensile 5kN, 15kN, 20kN, 25kN, 130kN, 200kN
Competent Testers
Tester Categories
Bronson Squibb GP
James Harman GP

Legend: GP = General Purpose

Areas Covered

We operate throughout the whole of the UK, the Republic of Ireland and internationally.

Contact Details

QST Construction Services Ltd
Unit 17, Cooperage Green
Weevil Lane
PO12 1FY

Tel:02392 581233
Fax:02392 581277